To reach 60 frames per second on Nintendo's handheld, Stellar Blade's Switch 2 port renders around 30 and lets frame generation draw the frames in between. Digital Foundry's Oliver Mackenzie took the trick apart in a ten-minute tech review on 7 November, comparing the Switch 2 version with the PS5 original and testing it with frame generation on and off. His verdict, as the video's description puts it: an Unreal Engine 4 PS5 game with no fancy current-gen features "translates relatively well to Switch 2".
The port itself launched on 5 November, and Xarmo covered its arrival on Switch 2 at the time. What Digital Foundry adds is the measuring tape.
Docked: fewer trees, cleaner edges
Start with what's missing. Against PS5's performance mode, Mackenzie points out from around the one-minute mark that the Switch 2 version strips out ground clutter, distant trees and a lot of dense foliage in open areas, though the cuts are much less obvious in tight interiors. The lighting and overall look survive the trip.
The surprise is image quality. Docked with frame generation on, he counts an internal resolution of roughly 540p, against 1440p on PS5. That sounds like a rout, but Mackenzie notes that the visibly higher-resolution PS5 picture suffers from a lot of flickering and sub-pixel breakup, while the Switch 2 version manages a more stable presentation. Fewer pixels, tidier picture. Image processing is strange.
The frame generation question
Frame generation is the whole story of this port. Docked, the game generates from a 30fps base to hit 60, and Mackenzie says it works better in practice than he expected, with artefacts mostly on hair and fast motion, and dips during heavy combat.
Switch it off and things get less comfortable. Docked resolution rises to about 648p, but the frame rate runs uncapped somewhere between 35 and 45fps, which he describes as jerky without VRR or a frame cap to smooth it out.
Handheld is where the mode switch flips
In handheld mode, the internal resolution drops to about 360p, and Mackenzie measures camera input latency at around 100 milliseconds with frame generation on. Turn it off in handheld and the console's VRR support comes into play, which he says makes the frame rate feel acceptably stable.
That makes the handheld choice a real one: generated smoothness with the extra latency, or a lower, variable frame rate that VRR keeps tidy. His wider point lands in the closing section: frame generation can be a questionable choice on powerful consoles, but on hardware as constrained as Switch 2 it's a practical compromise.
What the comments are asking for
The comment section, at least in the first six hours, was busy and divided. The single most repeated wish was for a 40fps mode, which several viewers argue should be standard for Switch 2 ports that can't hold 60. Others wanted the latency numbers Digital Foundry didn't give, especially handheld with frame generation off. Some viewers said the port doesn't run well enough, plenty more said portability is worth the trade, and a fair few were simply pleased the whole game is on the cartridge.
That split feels right. Digital Foundry's findings don't say this is the best way to play Stellar Blade. They say it's a surprisingly respectable one, with a settings menu worth a minute of your time.
From the creators
Watch the video
Reporting notes



