Retro Game Corps swaps an 8BitDo keychain d-pad into the Analogue Pocket

Retro Game Corps fits the d-pad from an 8BitDo keychain into the Analogue Pocket. Russ says it fixes the false diagonals in Contra and Tetris, but its glossy finish makes fighting games harder.

Jax Mercer

A small glowing cross-shaped crystal on a workbench beside precision tools

The Analogue Pocket's d-pad has a reputation, and Russ from Retro Game Corps thinks he's found a cheap way round it: pull the d-pad out of an 8BitDo keychain and fit it in the Pocket. In his latest video, he calls it a quick and unexpected $10 mod that improves the Pocket's d-pad "in a pretty significant way". Here's what's involved, and where it still falls short.

The problem it fixes

Russ lays out the d-pad problem early: the complaints Pocket owners raise about accidental diagonals and fighting game inputs, and a stock pad he finds touchy when rocking left and right in Contra. Not every Pocket is equal, either: of the units he owns, he rates his white one as having the worst d-pad.

The donor part is the d-pad from 8BitDo's 8BitBot keychain, a tiny novelty controller. The key difference, Russ says, is the pivot: the keychain pad has a taller centre point than the Pocket's stock one, which is what changes how it rocks under your thumb. He went black on a yellow Pocket, purely because it matched the bezel. Fair enough.

The mod, step by step

This is a teardown job, so be honest with yourself before starting. Russ follows the iFixit guide for replacing the Pocket's buttons, linked in his description, and goes through tools first, recommending iFixit's Pro Tech Toolkit.

The installation walkthrough runs in this order:

  1. Remove the back cover screws and disconnect the battery.
  2. Take out the button board.
  3. Separate the inner shell, unlatch the ribbon cables and lift the motherboard.
  4. Swap the stock d-pad for the 8BitDo one.
  5. Reverse it all: reseat the ribbon cables, secure the board, reattach the trigger board and close the shell.

Steps 3 and 5 are where the risk lives. Those ribbon cables are small, and reseating them properly is the difference between a better d-pad and a very expensive paperweight. If you've never done a teardown before, watch the whole section before you touch a screw.

Does it actually work?

Mostly, yes. In testing, Russ calls it a big improvement in Contra and Tetris, saying the more natural centre pivot cuts down the false diagonals that were bugging him.

Fighting games are the catch. In Marvel vs. Capcom, he finds the glossy finish of the 8BitDo pad grabs his thumb a little, making Shoryuken motions harder than on a matte, SNES-style pad. So if quarter-circles are your main diet, this isn't a clean win.

His verdict is that the mod is worth doing, and he's keeping the new d-pad in for good.

The trade-off is simple. If the stock pad's diagonals are ruining platformers and puzzle games for you, this is a cheap fix with a payoff, as long as you're comfortable opening up the console. If you mostly play fighting games, or you'd rather not risk the ribbon cables, it's probably not for you.

The comments were mostly warm and a bit cheeky. Some viewers mourned the poor keychain being gutted for parts, and the most popular joke suggested putting the Pocket's own d-pad into the keychain in return. Others were less amused that a handheld at the Pocket's price needs a fix from a keychain at all, and at least one viewer who'd been inside a Pocket said those tiny ribbon cables were the part they'd never do again.

Watch the video

Sources

More from Xarmo News